rf power dividers

3 resistor power dividers and 2 resistor power splitters do, however, have similar components. But the differences between rf power dividers and its opposing splitters could not have been any further apart. Both exhume completely different characteristics. Suitable for different and numerous purposes, dividers and splitters are not interchangeable either. By dint of its very name, the power divider divides equally the power of an input signal amongst numerous output signals.

The power divider is used as part of test and measurement risk management exercises. But the power divider can also be utilized as a power combiner. A 2 resistor power splitter, on the other hand, is used in leveling out loop measurement applications. It is also used for source leveling and subsequently achieves improved source matching for the user. 3 resistor power dividers are being used to distribute signals to two different antennae. A single power divider can be used to perform what are known as intermodulation distortion, or IMD, measurements.

But in this case, the power divider is essentially being used as power combiner. Two signals arise from two different sources. They are combined and then applied to what is termed as a device under test, or DUT. A spectrum analyzer will then be applied to measure the output of this DUT. And another use for the 2 resistor power splitter, not divider, is for the method of gain and power testing.

Whether you have intentions towards elevating the level of your prowess in a hobby of interest or whether there is space for its use in your commercial processing or manufacturing capacity, even for the purposes of general repair and maintenance work, it should go without saying that you should note in full the essential differences between power dividers and power splitters.

It is important that we take the time and effort to protect ourselves.  In the world we are living in there are a lot of people desperate and impaired in one way or another and who are out to do harm.  The act of personal protection should be looked at and reviewed on a daily basis.  Knowing what to do in any situation will help us if something does go wrong.

Don’t wait for help

You don’t want to wait for help.  In many cases help is too far away or just won’t make it in time.  This is why you need to know what to do and when.  For many of us we fear a lot of unknowns and even some of the known factors of life.  At the end of the day, don’t fear them.  You are here to survive.  Do everything in your power.


Increase your personal security.  Installing items such as cameras, commercial security door lock systems, alarms and more will help notify you that something is going on.  These devices in themselves are not going to save you from every possible situation.  However, increasing your security will give you that notification and extra time to take action.

Take action

commercial security door lock systems

Don’t wait.  If you feel you are in danger, take action.  The goal is to get yourself out of a specific situation before something happens.  If you delay in your actions, it could sacrifice you precious time or resources that you could have used to your advantage.  When taking action don’t hesitate.  Look at your options and make a decision. 

Take a safety class

It is also a good idea to get training on a wide range of topics.  You will want to take a self-defense class, purchase a whistle and mace and even a small weapon.  Some of these actions may sound excessive, but when it comes to your own safety, no one is going to take responsibility more than you.